NOTE:
To guarantee the functionality of the QSFP+ ports, use only HP QSFP+ transceiver modules and cables
•
on the HP 5700 switches.
The 40G QSFP+ port of the QSFP-40G-SR4-MM850 transceiver module can be split into four channels.
•
You can connect the 40G QSFP+ port to four 10G SFP+ ports. The QSFP-40G-SR4-MM850 transceiver
module and SFP+ transceiver modules to be connected must be the same in specifications, including
central wavelength and fiber diameter.
The QSFP+ transceiver modules and cables available for this switch series are subject to change over
•
time. For the most up-to-date list of SFP transceiver modules, consult your HP sales representative or
technical support engineer.
For QSFP+ transceiver module and cable specifications, see HP Comware-Based Switches Pluggable
Modules Manual.
10/100/1000Base-T autosensing Ethernet port
The
HP
10/100/1000Base-T autosensing Ethernet ports.
Table 16 10/100/1000Base-T autosensing Ethernet port specifications
Item
Connector type
Port transmission rate
Transmission medium and max
transmission distance
Compatible standards
1/10GBase-T autosensing Ethernet port
The HP 5700-32XGT-8XG-2QSFP+ and HP 5700-32XGT-8XG-2QSFP+ TAA switches have 1/10GBase-T
autosensing Ethernet ports.
Table 17 1/10GBase-T autosensing Ethernet port specifications
Item
Connector type
Port transmission rate
Transmission medium and max
transmission distance
5700-48G-4XG-2QSFP+
and
HP
5700-48G-4XG-2QSFP+
Specification
RJ-45
•
10 Mbps, half/full duplex, MDI/MDI-X autosensing
•
100 Mbps, half/full duplex, MDI/MDI-X autosensing
•
1000 Mbps, full duplex, MDI/MDI-X autosensing
100 m (328.08 ft) over category-5 twisted pair cable
•
IEEE 802.3i
•
IEEE 802.3u
•
IEEE 802.3ab
Specification
RJ-45
1/10 Gbps, full duplex, MDI/MDI-X autosensing
•
55 m (180.45 ft) over category-6 unshielded twisted pair cable
•
100 m (328.08 ft) over category-6 shielded twisted pair cable
•
100 m (328.08 ft) over category-6A or above twisted pair cable
50
TAA
switches
have