Oki MB770dn User Manual page 314

APPENDIX
WIRED 802.1X SETTING
ENABLE 802.1X
1
EAP-METHOD
WIRELESS SETTINGS
WIRELESS LAN
2
Note
• WIRELESS SETTINGS are printed only when the Wireless LAN Module is installed.
NETWORK SETTING - GENERAL PRODUCT - GENERAL
ETHERNET SPEED DUPLEX MODE
3
NETWORK SETTING - NETWORK - TCP/IP
ADDRESS MODE
HOST NAME
IP ADDRESS
4
SUBNET MASK
DEFAULT GATEWAY
NETWORK SETTING - NETWORK - IPv6
ENABLE IPv6
5
LLMNR
ADDRESS MODE
LINK LOCAL ADDRESS
IP ADDRESS
6
PREFIX LENGTH
DEFAULT GATEWAY
USE DHCPv6 SERVER FOR OPTIONS
USE STATELESS FOR IP ADDRESS (M FLAGS)
7
USE STATELESS FOR OPTIONS (O FLAGS)
Function
Function
Function
Function
Function
Description
Shows whether the wired 802.1X authentication is
enabled or disabled.
Shows the current EAP-method.
Description
Shows whether the Wireless LAN function is enabled
or disabled.
Description
Shows the Ethernet speed setting.
Description
Shows the TCP/IP address mode.
Shows the TCP/IP address mode.
Shows the IP address of this equipment.
Shows the subnet mask of this equipment.
Shows the default gateway address of this
equipment.
Description
Shows whether the IPv6 protocol is enabled or
disabled.
Shows whether the LLMNR (Linklocal Multi-cast
Name Resolution) is enabled or disabled.
Shows the IPv6 address mode.
Shows the link local address of this equipment.
Shows the IPv6 address of this equipment.
Shows the prefix length of the IPv6 address.
Shows the default gateway address of this
equipment.
Shows whether the optional information is obtained
from the DHCPv6 server.
Shows whether the stateless usage (IP address
acquisition M flag) is enabled or disabled.
Shows whether the stateless usage (optional
information acquisition O flag) is enabled or
disabled.
- 314 -
User
NO
NO
User
NO
User
NO
User
NO
NO
NO
NO
NO
User
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO