Oki MB770dn User Manual page 254

SETTING ITEMS (ADMIN)
Setting the IPv6 protocol automatically (in a
stateful network environment)
1
1
On the IPv6 screen, specify the following
items as required and press
2
Item name
3
IPv6 PROTOCOL
LLMNR
4
ADDRESS MODE Select [STATEFUL] for the IPv6
Link Local
Address
5
Note
• The link-local address cannot be used to connect to
network places across a router.
• [ENABLE] and [DISABLE] for the LLMNR protocol are
available when you select [ENABLE] for the IPv6
protocol.
6
7
.
Description
• ENABLE — Press this button
to enable the IPv6 protocol.
• DISABLE — Press this button
to disable the IPv6 protocol.
• ENABLE — Press [ENABLE]
to enable the LLMNR
(Linklocal Multicast Name
Resolution) protocol.
• DISABLE — Press [DISABLE]
to disable the LLMNR protocol.
addressing mode.
The unique address used in IPv6
is displayed.
2
Specify the following items as required and
press .
Item name
ENABLE DHCP
(IP Address)
ENABLE DHCP
(OPTIONS)
FQDN Option
FQDN Update
Method
Note
• [ENABLE DHCP (IP Address)] and [ENABLE DHCP
(OPTIONS)] cannot be disabled simultaneously.
- 254 -
Description
• ENABLE — Press this button
to use the IPv6 address issued
by the DHCPv6 server.
• DISABLE — Press this button
to disable the IPv6 address
issued by the DHCPv6 server.
• ENABLE — Press this button
to use the optional information
(IPv6 address for the DNS
server, etc.) other than the
IPv6 address for this
equipment issued by the
DHCPv6 server.
• DISABLE — Press this button
to not use the optional
information other than the IPv6
address for this equipment
issued by the DHCPv6 server.
• ENABLE — Press this button
to assign a FQDN (Fully
Qualified Domain Name) using
the DNS server.
• DISABLE — Press this button
to not assign a FQDN using
the DNS server.
• CLIENT — Press this button to
update the DNS server from
this equipment.
• SERVER — Press this button
to update the DNS server from
the DHCPv6 server.