Oki MB770dn User Manual page 273

4
The WIRELESS LAN SECURITY SETTINGS
screen is displayed.
Continue to the procedure for specifying the security
mode.
 P.273 "Select security mode"
Entering the SSID manually
1
Press [SSID].
The letter entry screen is displayed.
2
Enter the SSID using the keyboard and
digital keys and press [OK].
The screen returns to the SSID SETTINGS screen.
3
Press [NEXT].
4
The WIRELESS LAN SECURITY SETTINGS
screen is displayed.
Continue to the procedure for specifying the security
mode.
 P.273 "Select security mode"
 Select security mode
After specifying the SSID, you must select the security mode
for your wireless network.
The procedure to configure the security mode varies
depending on the security mode that you select.
P.273 "Selecting WPA/WPA2/802.1X security mode with

EAP-TLS protocol"
 P.275 "Selecting WPA/WPA2/802.1X security mode with
PEAP protocol"
 P.277 "Selecting WPAPSK/WPA2PSK security mode"
 P.278 "Selecting WEP security mode"
 P.279 "Selecting no security mode"
Note
• If you are not sure what security mode to select, see the
following section to determine the security mode.
Selecting WPA/WPA2/802.1X security mode
with EAP-TLS protocol
Using the WPA/WPA2/802.1X with the EAP-TLS protocol, you
must install user certification file and CA certification file in the
equipment. This equipment uses the user certification file to
authenticate the access rights to the wireless network, and the
RADIUS server authenticate this equipment using the CA
certification file.
- 273 -
SETTING ITEMS (ADMIN)
1
2
3
4
5
6
7