Oki MB770dn User Manual page 210

USING TEMPLATES
14
If the screen below appears, place another
original on the document glass and press
[SCAN] or the [START] button to continue
1
scanning. To finish the job, press [JOB
FINISH], followed by the [RESET] button.
2
• The above screen is not displayed under the following
conditions:
3
- You scan the original from the Reversing Automatic
Document Feeder without pressing [CONTINUE] to
scan additional originals.
- A scan preview is displayed.
• To cancel the operation, press [JOB CANCEL].
• To change the scan settings, press [SCAN SETTING].
 P.163 "Changing Scan Settings"
4
Note
• When the equipment has scanned more than 1000
pages in a job, the "The number of originals exceeds
the limits. Will you save stored originals?" message
appears. If you want to save the scans, press [YES].
• When the temporary workspace is full on the
equipment's hard disk, a message appears and the job
is canceled. The available workspace can be viewed
5
on the TopAccess [Device] tab.
• If the number of jobs waiting to store scans in the
equipment's hard disk exceeds 20, a message appears
to indicate that the equipment's memory is full. In this
case, wait a while until memory becomes available
again or delete unnecessary jobs from [JOB STATUS].
 Basic Guide
6
7
- 210 -