840653
12.8
Transporting Of The CoolDrawer
Prior to installation:
It is recommended that the CoolDrawer is transported in its own packaging carton in an upright, or sitting on
its base with the drawer front taped closed.
This type of product should not be transported on its back or on the right hand end (compressor down
wards).
Failure to follow these steps will led to the system slugging oil, as being transported any other way will allow
oil in the crankcase to enter suction lines and it takes some time for this oil to return to the crankcase.
While the drawer can be serviced upside down to gain access to the compressor components, the order in
which the product is rotated is important.
With the drawer front closed and tapped shut, the product should be rotated front first to be placed on its
roof. Rotate in the reverse direction to return it to the correct orientation.
76