Fisher & Paykel RB90S64MKIW Service Manual page 64

840653
• Unclip the guide by pushing to the right, then
lifting on the left hand side and pulling to the
left at the same time.
• Depress the tab on the harness rear wall
cover and pull the cover forward.
• Unplug and remove the complete harness.
Refit in reverse order.
• When replacing the harness, the tape mark
on the new harness must align with the
window on the guide. This ensures that the
harness is correctly located in the guide.
Window in guide
Tape on harness
1. Push
64
3. Slide
2. Lift