840653
12.3
Component Replacement
12.3.1
Removal Of Drawer Gaskets
Integrally foamed doors with the outer and inner door panels foamed as one unit are becoming more
common for manufacturers. This means that only the drawer gasket is able to be replaced as a separate
part.
All replacement drawer panels are supplied minus the gasket. The drawer gasket is a replaceable part of
the drawer. It is held in place against the drawer liner by means of a moulding that locks the gasket in place
once pushed into it. There are no screws or retainers to remove or fit.
To Remove the Gasket
Pull on any section of the gasket to pull it away from the moulding.
To Replace the Gasket
Having removed the old gasket, lay the new gasket around the drawer gasket retainer moulding. First fit all
corners, then push the remaining gasket into place around the drawer.
56