SAFETY AND WARNINGS WARNING! WARNING! Electric Shock Hazard Tip Hazard Failure to follow this advice may result in This product may tip. Keep children away and electrical shock or death. take care. Failure to follow this advice may result in injury. •...
SAFETY AND WARNINGS VACUUM SEAL DRAWER MODELS READ AND SAVE THIS GUIDE To reduce the risk of fire, injury to persons or damage when using the appliance, follow the important safety guides listed below. Read all the instructions before using the appliance. Installation Please make this information available to the person installing the product.
UNPACK YOUR PRODUCT ELECTRICAL SPECIFICATIONS Remove the Vacuum Seal Drawer and accessories box from the packaging. Recycle the All electrical work must be done by a qualified electrician, or a Fisher & Paykel trained and materials that can be reused. Dispose packaging materials in accordance with local regulations supported service technician.
PARTS SUPPLIED TOOLS REQUIRED VACUUM SEAL DRAWER VACUUM SEAL DRAWER MINIMAL VB24SDEB & VB30SDEB CONTEMPORARY VB24SDEX & VB30SDEX PROFESSIONAL VB30SPEX MINIMAL VB24SDEB & VB30SDEB CONTEMPORARY VB24SDEX & VB30SDEX SERVICE & WARRANTY PROFESSIONAL VB30SPEX SERVICE ET GARANTIE ΣΈΡΒΙΣ ΚΑΙ ΕΓΓΎΗΣΗ SERVIZIO E GARANZIA SERVICE &...
PRODUCT DIMENSIONS - 24" MINIMAL & CONTEMPORARY MODELS VB24SD PRODUCT DIMENSIONS A Overall height of drawer 5 1/2 B Overall width of drawer 23 7/16 C Overall depth of drawer* 22 1/4 D Height of chassis 5 1/2 E Width of chassis** 21 7/8 F Depth of chassis*** 21 1/2...
PRODUCT DIMENSIONS - 30" MINIMAL & CONTEMPORARY MODELS VB30SD PRODUCT DIMENSIONS A Overall height of drawer 10 11/16 B Overall width of drawer 29 15/16 C Overall depth of drawer* 22 1/2 D Height of chassis 10 11/16 E Width of chassis** 28 3/8 F Depth of chassis*** 21 3/4...
PRODUCT DIMENSIONS - 30" PROFESSIONAL MODELS VB30SP PRODUCT DIMENSIONS A Overall height of drawer 10 11/16 B Overall width of drawer 29 15/16 C Overall depth of drawer* 22 1/2 D Height of chassis 10 11/16 E Width of chassis** 28 3/8 F Depth of chassis*** 21 3/4...
CABINETRY DIMENSIONS - 30" MINIMAL & CONTEMPORARY MODELS FLUSH INSTALL 13/16 (20mm)* PLAN PROFILE PROUD INSTALL VB30SD CABINETRY DIMENSIONS INCHES A Minimum inside height of cavity 10 3/4 B Minimum inside width of cavity 28 1/2 C Minimum inside depth of cavity 22 1/2 D Overall width of cabinetry E Minimum clearance between top of front panel...
CABINETRY DIMENSIONS - 30" PROFESSIONAL MODEL FLUSH INSTALL 13/16 (20mm)* PROFILE PLAN PROUD INSTALL VB30P CABINETRY DIMENSIONS INCHES A Minimum inside height of cavity 10 3/4 B Minimum inside width of cavity 28 1/2 C Minimum inside depth of cavity 22 1/2 D Overall width of cabinetry 13/16 (20mm)*...
INSTALLATION OPTIONS STANDALONE INSTALLATION COMBINED WITH SINGLE OVEN COMBINED WITH COMPANION PRODUCT This installation is suitable for Minimal, Contemporary & This combination is suitable for 24" and 30" Vacuum seal This combination is suitable for 24" and 30" Vacuum seal Professional 24"...
Page 15
INSTALLATION OPTIONS COMBINED WITH DOUBLE OVEN COMBINED WITH SINGLE OVEN & COMPANION PRODUCT This combination is suitable for 30" Vacuum seal drawer that can fully support both This combination is suitable for 30" Vacuum seal drawer that can fully support a Fisher &...
PRIOR TO INSTALLATION INSTALL THE AIR FILTER REMOVE THE TRANSIT SCREWS The transport screws must be removed before starting up for the first time to avoid damage to the drawer. power cable holder Unscrew the transport screws from under the power cable and holder. transport screws locking cap...
INSTALLING THE DRAWER Connect the power plug into the power outlet. Open the drawer and extend fully. Slide the drawer carefully into the cabinetry. Push the drawer back into the cabinetry while ensuring the side Secure the attachment flanges of brackets engages the anti-tip the drawer to the side edges of brackets.
ADJUSTING THE DEPTH ADJUSTING THE HEIGHT Applicable for 30" Vacuum seal drawer only. The depth of the front panel of the drawer can be The front panel of the drawer can be adjusted vertically to align with the surrounding adjusted to align with the surrounding cabinetry. cabinetry.
INSTALLER CHECKLIST PRODUCT OFF USER PRESSES ON/OFF BUTTON FP WARMER DRAWER INTERFACE LOGIC_V1 IMPORTANT! Read all installation instructions in this manual to see if the unit has been correctly installed. ALL OTHE Ensure that installation has been completed correctly before use. TEMPERA MEDIUM Ensure that:...