Interior Led Lights; Speaker; Wiring Harness Air Bell - Fisher & Paykel RB90S64MKIW Service Manual

8.1.10

Interior LED Lights

These are used to illuminate the interior of the drawer when it is opened, and are located on the back face of
the drawer front. They consist of three LEDs mounted on a printed circuit board and connected to the wiring
harness by means of a plug. Individual LEDs are not replaceable as they all part of the PCB they are
mounted on.
8.1.11

Speaker

This is located on the end of the display module and is used as sound recognition between the user and the
capacitive touch switches that make up the user interface.
8.1.12

Wiring Harness Air Bell

Located in the evaporator sump of the cabinet, this is the plug termination area for the defrost element,
evaporator fan motor, sensors and auxiliary heater. The air bell cover prevents water from entering the
plugs and sockets that are all terminated at this point. The cover must always be fitted, taking care not to
pinch the harness wires.
Wiring Harness Air Bell Cover
35
840653