Removal Of Anti Racking Bar - Fisher & Paykel RB90S64MKIW Service Manual

840653
• The gasket may have set in a compressed position, so it may need to be extended out by hand or
softened with a heat gun, on low setting, to encourage it to the new position. Change the gasket if
required.
• Open and close the door slowly and check that the gasket seals to the cabinet.
• Secure the drawer by extending the centre locking screws.
Completion.
• Reverse the preparation instructions to reinstall the product.
12.3.10

Removal Of Anti Racking Bar

• Remove the drawer front panel (refer to Section
12.3.8).
• With a screwdriver, spring out the clip on the
anti-racking bar lock.
• Slide the lock inwards.
• Slide the lock to the rear and remove.
1. Slide inwards
Anti-racking bar
60
2. Slide to rear
Anti-racking bar lock