Removing The Bezel (Rack Or Tower); Working With Adapters - IBM Netfinity 5100 8658 11Y Manual

Removing the bezel (rack or tower)

1
Bezel-release lever
2
Bezel
To remove the bezel:
1. Move the blue bezel-release lever, following the curve
of the lever opening.
Note: The illustration shows a rack model.
2. Lift the bezel tabs out of the slots and pull the bezel
away from the server front. Store the bezel in a safe
place.

Working with adapters

You can install up to five peripheral component
interconnect (PCI) adapters in the expansion connectors,
called slots, on the system board of your server.
Your server comes with an integrated video controller,
which is a component on the system board. When you
install a video adapter, the server BIOS automatically
disables the integrated video controller.
The following illustration shows the location of the 33 MHz
PCI expansion slots on the system board.
Installing options
67