Netfinity Manager Service Manager; Netfinity Manager Service Descriptions - IBM Netfinity 5100 8658 11Y Manual

use Netfinity Database Administration to configure
Netfinity Manager database support. For more
information on Database Administration, see
"ODBC Database Support" in Netfinity Manager
Quick Beginnings.
2. Start the Netfinity Service Manager.
To start the Netfinity Service Manager, double-click the
Netfinity Service Manager object.

Netfinity Manager Service Manager

All Netfinity Manager services that are supported by the
operating system can be started from the Netfinity
Manager Service Manager window. The services that are
available for use depend on the installation configuration
that was selected during installation.
To start any Netfinity Manager service that appears in the
Service Manager window, double-click the icon for that
service. To start a Netfinity Manager service on a remote
system, use the Remote System Manager service.

Netfinity Manager service descriptions

Each Netfinity Manager service consists of a base program
and a graphical user interface (GUI). The service base
programs enable Netfinity Manager to remotely access the
individual services, but do not allow for local access. The
service GUIs, when functioning along with their respective
base program, enable access to the service.
Some services are available only on systems with certain
system configurations. These services are:
v Alert on LAN Configuration (available only on systems
running Windows 95 or later or Windows NT 4.0 or
later)
v Capacity Management (available only on systems
running Windows NT 4.0 or later)
v Cluster Manager (available only on systems running
Windows NT 4.0 or later)
140
: Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y,
41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY