IBM Netfinity 5100 8658 11Y Manual page 187

Error Code/Symptom
00180300 (No more
memory (above 1MB for
PCI adapter)
00180400 (No more
memory (below 1MB for
PCI adapter)
00180500 (PCI option
ROM checksum error)
00180600 (PCI built-in
self test failure) PCI to
PCI Bridge error
00180700, 00180800
(General PCI error)
01295085 (ECC checking
hardware test error)
01298001 (No update
data for processor 1)
01298002 (No update
data for processor 2)
01298101 (Bad update
data for processor 1)
01298102 (Bad update
data for processor 2)
I9990301 (Fixed boot
sector error)
I9990305 (Fixed boot
sector error, no operating
system installed)
FRU/Action
1. Run Configuration/Setup
2. Failing Adapter
3. System Board
1. Run Configuration/Setup
2. Move the failing adapter to slot 1
or 2
3. Failing Adapter
4. System Board
1. Remove Failing PCI Card
2. System Board
1. Run Configuration/Setup
2. Move the failing adapter to slot 1
or 2
3. Failing Adapter
4. System Board
1. System Board
2. PCI Card
1. System Board
2. Processor
1. Ensure all processors are the
same cache size.
2. Processor 1
1. Ensure all processors are the
same cache size.
2. Processor 2
1. Ensure all processors are the
same cache size.
2. Processor 1
1. Ensure all processors are the
same cache size.
2. Processor 2
1. Hard Disk Drive
2. SCSI Backplane
3. Cable
4. System Board
1. Install operating system to hard
disk drive.
Symptom-to-FRU index
177