Removing The Power Supply Backplane - IBM Netfinity 5100 8658 11Y Manual

Removing the power supply backplane

1
Tab
2
Power supply backplane
To remove the power supply backplane:
1. Power off the server.
2. Disconnect all external cables from the server.
3. Remove the cover. See "Removing the cover, door,
and bezel" on page 63.
4. Disconnect cables from the backplane.
5. Press the arrow on the tab 1 to release the backplane.
6. Slide out the power supply backplane 2 to remove.
FRU information (service only)
157