Hot-Swap Drives - IBM Netfinity 5100 8658 11Y Manual

Rack model
1
SCSI ID 9
2
Non-hot-swap bay B
3
Non-hot-swap bay C
4
Non-hot-swap bay A
5
Non-hot-swap bay D
6
Hard disk activity light
7
Hard disk status light
8
SCSI ID 5
9
SCSI ID 4
10
SCSI ID 3
11
SCSI ID 1
12
SCSI ID 0
13
Hot swap bays

Hot-swap drives

Your server contains hardware that lets you continue to
operate your system while a hard disk drive is removed or
installed. These drives are known as hot-swappable drives.
They are also referred to as hot-swap drives.
Each hot-swap drive that you plan to install must have a
hot-swap-drive tray attached. The drive must have a single
connector attachment (SCA) connector. Hot-swap-drive
trays come with the hot-swap drives.
v Your server supports six slim (1-inch) or three half-high
(1.6-inch), 3.5-inch hot-swap hard disk drives in the
hot-swap bays.
Installing options
73