Installing the bezel and front door
1
Bezel
2
Server door
3
Flange
To install the bezel:
1. Place the tabs at the bottom edge of the bezel in the
slots at the bottom front of the server.
2. Press the top of the bezel toward the server until the
bezel clicks into place.
To install the server door:
1. Set the door on the bottom hinge.
2. Press the flange downward while pressing the top of
the door toward the server, until the flange connects
with the top hinge. Then, release the flange.
3. Close and lock the server door.
Attention:
least 127 mm (5 inches) on the front and rear of the
server to allow for air circulation.
Be sure to maintain a clearance of at
Installing options
93