Installing Or Removing A Power Supply - IBM Netfinity 5100 8658 11Y Manual

Table 10. Microprocessor speed settings
Microprocessor
speed
667/133
733/133
800/133
Note: The speed settings shown above apply only to
unlocked processors. If the processors are
production level they are locked and there is no
need to change the speed settings.
7. If you have other options to install or remove, do so
now; otherwise, go to "Installing the cover" on page 92.

Installing or removing a power supply

Your server comes with one power supply. You can replace
the power supply backplane with an optional backplane
that will enable you to add a second and third power
supply, and will make the power supplies hot-swappable.
Each power supply has two status indicators; see the
following illustration for information about the status
indicators and power supply bay locations.
Switch 1 Switch 2 Switch 3 Switch 4
On
On
Off
On Off
Off Off
On On
Installing options
Off
Off
On
85