IBM Netfinity 5100 8658 11Y Manual page 176

Error Code/Symptom
030-XXX-00N (Failed
SCSI test on PCI slot N.
Check system error log
before replacing a
FRU.)
035-XXX-099
035-XXX-S99 (Failed
RAID test on PCI slot S.
Check System Error
Log before replacing a
FRU.)
035-XXX-SNN (Check
System Error Log
before replacing a FRU.
NN = SCSI ID of failing
fixed disk.)
035-253-S99 (RAID
adapter initialization
failure)
075-XXX-000 (Failed
Power Supply test)
089-XXX-001 (Failed
Microprocessor test)
089-XXX-002 (Failed
Optional Microprocessor
test)
165-XXX-000 (Failed
Service Processor test)
180-XXX-000
(Diagnostics LED
failure)
180-XXX-001 (Failed
information LED panel
test)
166
: Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y,
41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
FRU/Action
1. Adapter
1. No adapters were found.
2. If adapter is installed re-check
connection.
1. Cable
2. SCSI Backplane
3. Adapter
1. Fixed Disk with SCSI ID NN on
RAID adapter in PCI slot S.
1. ServeRAID Adapter in slot S is
not configured properly. Obtain
the basic and extended
configuration status and refer to the
ServeRAID Hardware Maintenance
Manual for more information.
2. Cable
3. SCSI Backplane
4. Adapter
1. Power Supply
1. VRM 1
2. Microprocessor 1
1. VRM 2
2. Microprocessor 2
1. System Board. Before replacing
the System Board, ensure that
System Board jumper J45 is not
installed (the default) when the
error occurs.
2. Power Backplane
3. Hot-Swap Drive Backplane
1. Run Diagnostic LED test for the
failing LED.
2. Power Switch Assembly
1. Information LED Panel
2. Diagnostic LED Panel