Managing/Editing Clips Using A Computer - Sony PXW-FS7M2 Operating Instructions Manual

000 78
6. External Device Connection

Managing/Editing Clips using a Computer

Connecting Using a USB Cable
Using an XQD card reader (option)
Connect an MRW-E80 XQD Card Reader (option)
using a USB cable, and insert a memory card in the
slot. The memory card is recognized as a computer
extension drive.
Using mass storage mode
Connect the camcorder using a USB cable, and
insert a memory card in the slot. The memory card
is recognized as a computer extension drive.
1
Turn the camcorder POWER switch to the ON
position.
A message appears on the screen or
viewfinder asking whether to enable USB
connection.
[Note]
The USB connection confirmation message is not
displayed while another confirmation message or
progress message is displayed, for example, when
formatting or restoring an XQD memory card.
The confirmation message is displayed when the
formatting or restoring execution ends. The USB
confirmation message is also not displayed when the
clip properties screen is displayed. The message is
displayed when processing ends or when you return to
the thumbnail screen.
2
Turn the SEL/SET dial and select Execute.
3
On Windows, check that the card is added as a
removable disk in the "My Computer" window.
On Macintosh, check that a folder called "NO
NAME" or "Untitled" (editable) is created on the
Desktop.
[Notes]
ˎ Do not perform the following operations if the access ˎ
lamp is lit red.
– Turning the power off or disconnecting the power cord
– Removing the XQD memory card
– Disconnecting the USB cable
ˎ Operation is not guaranteed to work on all computers. ˎ
Using nonlinear editing systems
In a nonlinear editing system, editing software
(option) that supports the formats recorded by the
camcorder is required.
Use dedicated application software to save the
clips you want to edit on the HDD of the computer
beforehand.