Wiring The Solar Panel - BFT ECOSOL Installation Manual

14
1
CONNECT CABLE TO SOLAR PANEL
USE 16 AWG OR BETTER, STRANDED WIRES
Remove the 4 screws that
●
hold the cover to the solar
panel terminal block.
Run the cable through (1) of
●
the connector fittings.
Connect the black wire to
●
the left (negative) terminal
and the red wire to the right
(positive) terminal.
2
RUN THE CABLE TO THE ECOSOL ENCLOSURE
3
CONNECT CABLE TO TERMINAL STRIP

WIRING THE SOLAR PANEL

15 ft. max cable length
FROM SOLAR PANEL
www.BFTGateOpeners.com | (800) 878-7829
Connect the wires from the solar
panel to the terminals labeled SOLAR
PANEL – and SOLAR PANEL +