Radio Transmitters - BFT ECOSOL Installation Manual

28
PROGRAMMING THE MITTO
1 PRESS THE RADIO LEARN BUTTON
ON THE ECOSOL, ONCE TO
ENABLE THE REMOTE TO OPEN
AND CLOSE THE GATE -OR- TWICE
TO ENABLE THE REMOTE TO ONLY
OPEN THE GATE
PROGRAMMING THE T-BOX (Not included)
PRESS AND HOLD THE ON
1
BUTTON UNTIL THE RED LED
TURNS ON STEADY
4 PRESS THE RADIO LEARN
BUTTON ON THE ECOSOL,
ONCE TO ENABLE THE
KEYPAD TO OPEN AND CLOSE
THE GATE -OR- TWICE TO
ENABLE THE KEYPAD TO ONLY
OPEN THE GATE

RADIO TRANSMITTERS

3
ENTER THE 4 DIGIT CODE FOR
2
CHANNEL 1 (DEFAULT=1111)
STEADY
www.BFTGateOpeners.com | (800) 878-7829
PRESS AND HOLD THE HIDDEN BUTTON UNTIL
2
THE RED LED TURNS ON SOLID
Physical hidden button
BACK OF TRANSMITTER
PRESS THE BUTTON WHICH
YOU WOULD LIKE THE GATE
TO OPERATE WITH. FOR
ADDITIONAL MITTOS, GO TO
STEP 2. WAIT 10 SECONDS
AFTER LAST TRANSMITTER
LEARNED TO TEST.
5
OR
Virtual hidden button
Both buttons at the same time
FRONT OF TRANSMITTER
PRESS THE ON BUTTON. RED
3
LED MUST BE BLINKING
BLINKING
PRESS THE ON BUTTON. WAIT
10 SECONDS BEFORE
TESTING THE KEYPAD. REFER
TO T-BOX MANUAL FOR
INSTRUCTIONS ON HOW TO
CHANGE DEFAULT CODE
BLINKS
AND
TURNS
OFF