Initial Programming - BFT ECOSOL Installation Manual

Libra ul-r pre-wired enclosure

Hide thumbs Also See for ECOSOL:

Installation and user manual (24 pages)

Table Of Contents

Table of Contents

THE PROGRAMMING MAIN MENU

Press the OK

Use the

and

Press the

and

SINGLE MOTOR OPERATION

From the main programming menu, scroll to

Scroll down to

Press the

button to switch to

Use the

and

Press the

and

AUTOMATIC TORQUE ADJUSTMENT (AUTOSET)

WARNING – Gate path must be free of all traffic and obstructions. The system will

automatically open and close the gate at full torque while performing the self-learning

adjustment. Failure to do so can result in property damage and/or bodly injury including

death.

Gate must be fully closed and operators must have the CLOSE limit triggered before starting

From the main programming menu, scroll to

Upon completion of the close cycle, the screen should display

process.

If KO

is diplayed, check for unsual physical gate hardware resistance or incorrect installation

geometry and try again.

Use the

and

Press the

and