WHILE IN THE SUB-MENU
Navigation of the sub-menu is the same as the main menu. Once a sub-menu selection has been made:
USE
TO TURN ON AND
USE THE
BUTTON AS "ENTER" TO CONFIRM THE DESIRED VALUE
PRESS
AND
LOGIC OPTIONS
DISPLAY
LOGIC SUB-MENU
TO TURN OFF THE SELECTED FEATURE.
AT THE SAME TIME TO RETURN TO THE MAIN MENU
TCA – Auto Close Timer. Default: OFF
●
3 STEP – Instant reverse. Gate instantly reverses on START activation during the
●
CLOSE cycle as opposed to stopping and requiring a 2
Default: OFF
IBL OPEN – Ignore START input during OPEN cycle . Default: OFF
●
FAST CLS – Gate closes immediately after SAFETY input is cleared. Default: OFF
●
PHOTOC OPEN – Ignore SAFETY input during OPEN cycle. If OFF, gate stops on
●
SAFETY input activation during the OPEN cycle. Default: OFF
TEST PHOT – Enables the SAFETY input supervision circuit. Default: OFF
●
1 MOT ON – Single gate operation. Ignores MOTOR 1. Default: OFF
●
BLOC PERSIST – Operator pushes for 0.5 seconds after CLOSE limit is
●
reached. PHYSICAL GATE STOP IS REQUIRED. Default: OFF
START-CLOSE – Converts START/CLOSE input into CLOSE ONLY input.
●
Default: OFF
FIXED CODE – Disables the receiver's rolling code feature. Default: OFF
●
RADIO PROG – Enables Quick Remote Programming. Default: ON
●
MASTER – NOT USED. Default: OFF
●
www.BFTGateOpeners.com | (800) 878-7829
DESCRIPTION
nd
START input for re-opening.
DO NOT USE WITH ECOSOL
NO EFFECT WITH ECOSOL
NO EFFECT WITH ECOSOL
25