Libra Ul-R Programming - BFT ECOSOL Installation Manual

22
POWER UP THE CONTROLLER
JP14
NAVIGATE THE PROGRAMMING MENU
Use the LCD display and the 3 buttons on the upper right corner of the Libra UL-R to navigate and manipulate
the menu.
PRESS 2 TIMES TO ENTER THE MAIN PROGRAMMING MENU
USE THE AND
UP AND DOWN THE MENU
USE THE BUTTON AS "ENTER" TO SELECT A MENU CHOICE
OR CONFIRM A PROGRAMMING ORDER
PRESS AND

LIBRA UL-R PROGRAMMING

Instal the jumper provided on both pins labeled JP14 on the Ecosol
interface board. As long as this jumper is in place the Libra UL-R
will be powered for the programming process
REMOVE JUMPER UPON PROGRAMMING COMPLETION
BUTTONS TO SCROLL
AT THE SAME TIME TO EXIT PROGRAMMING
www.BFTGateOpeners.com | (800) 878-7829
Failure to do so will result in rapid battery discharge