Table of Contents
Advertisement
The main menu has 6 options. Of these 6, the first 3 are sub-menus (PARAMETERS, LOGIC, RADIO).
Because the transmitters are programmed to the ECOSOL interface board, the RADIO sub-menu
MUST NOT BE USED!
USE THE
UP AND DOWN THE MENU
USE THE
OR CONFIRM A PROGRAMMING ORDER
DISPLAY
PARAMETERS – Sub-menu where times and percentages are set (toque settings,
run times, timer to close). See page 24.
LOGIC – Sub-menu where features are enabled or disabled. See page 25.
RADIO – Sub-menu where wireless devices (remote controls, wireless keypads,
etc.) are programmed or deleted.
LANGUAGE – Menu area where the selection of the menu language is made
DEFAULT – By selecting this menu option, the control board restores all its factory
settings and changes language to Italian. The RADIO area remains unchanged.
AUTOSET – By selecting this menu option, the actuators will automatically open
and close at full torque and will self adjust its torque settings according to the
gate weight. The operator's limit switches must be set and the gates must
be in the fully closed position prior to performing the AUTOSET. Please
refer to the operator's manual for proper limit switch setting procedure.
PRESS
MAIN MENU
AND
BUTTONS TO SCROLL
BUTTON AS "ENTER" TO SELECT A MENU CHOICE
DESCRIPTION
AND
AT THE SAME TIME TO EXIT PROGRAMMING
www.BFTGateOpeners.com | (800) 878-7829
DO NOT USE WITH ECOSOL
23
Hide quick links:
Advertisement
Table of Contents
