Operational Safety - BFT ECOSOL Installation Manual

The installer is responsible for communicating the following information to the end-user:
This product has been designed and built solely for the purpose indicated herein. Uses not contemplated herein
might result in the product being damaged and could be a source of danger.
The Firm disclaims all responsibility resulting from improper use or any use other than that for which the product
has been designed, as indicated herein, as well as for failure to apply Good Practice in the construction of entry
systems (doors, gates, etc.) and for deformation that could occur during use. If installed and used correctly, the
automated system will meet the required level of safety. Nonetheless, it is advisable to observe certain rules
of behavior so that accidental problems can be avoided:
•
Keep adults, children and property out of range of the automated system, especially while it is operating.
•
Operate the system when the full path of the gate is within sight.
•
It is essential to frequently check that all safety devices are in good working condition.
•
This application is not meant for use by people (including children) with impaired mental, physical or
sensory capacities, or people who do not have suitable knowledge, unless they are supervised or have been
instructed by people who are responsible for their safety.
•
Children must be supervised to ensure they do not play with the system. Keep remote controls or other
control devices out of reach of children in order to avoid the automated system being operated
inadvertently.
•
Check the system frequently, especially hinges, cables, springs or supports, to detect any loss of balance
and signs of wear or damage.
•
When cleaning the outside or performing other maintenance work, always cut off mains power.
•
Keep the photocells' optics and illuminating indicator devices clean. Check that no branches or shrubs
interfere with the safety devices (photocells).
•
Do not use the automated system if it is in need of repair. In the event of a malfunction, cut off the power,
activate the emergency release to allow access and call in qualified technical personnel (professional
installer).
•
If the automated system requires work of any kind, employ the services of qualified personnel (professional
installer).
•
Anything that is not explicitly provided for in these instructions is not allowed.
•
The operator's proper operation can only be guaranteed if the information given herein is complied with.
The Firm shall not be answerable for damage caused by failure to comply with the installation rules and
instructions featured herein.
•
Have the complete system checked including all safety devices by a qualified professional technician at
least once a year.
Descriptions and illustrations herein are not binding. While we will not alter the product's essential features, the
Firm reserves the right, at any time, to make those changes deemed necessary to improve the product from a
technical, design or commercial point of view, and will not be required to update this publication accordingly.

OPERATIONAL SAFETY

www.BFTGateOpeners.com | (800) 878-7829
9