Alarm Operation - Aastra DT4X3 User Guid

User Manual
Cordless Phones for MX-ONE™
12

Alarm Operation

The parameters described in this chapter are set in the WinPDM/CPDM3. See the handset's
Configuration Manual.
Note: The alarm functionality is applicable for DT423/DT433 only.
12.1 Push-Button Alarm
The push-button
By default, long press is defined for test alarm (see
defined for personal alarm (see
12.1.1 Test Alarm
Press and hold the push-button
displayed. Depending on set parameters;
• a beep is heard
• the orange LED flashes twice
• the vibrator stirs
• the handset receives a notification that the alarm has been received by the system. This is a
system dependent feature.
• if configured, the ALS (see
alarm has been sent, or a call is established to a pre-defined number (see
Call after Alarm
• if configured, the ALS (see 6.4 Acoustic Location Signal on page 32) is activated after the
alarm has been sent, or a call is established to a predefined number (see 6.5 Automatic Call
after Alarm on page 32)
• information about the handset's location is sent along with the alarm, see
Location Information
12.1.2 Personal Alarm
Press the push-button
displayed. Depending on set parameters;
• a beep is heard
• the orange LED flashes twice
• the vibrator stirs
• the handset receives a notification that the alarm has been received by the system. This is a
system dependent feature.
• if configured, the ALS (see
alarm has been sent, or a call is established to a pre-defined number (see
Call after Alarm
• information about the handset's location is sent along with an alarm, see
Location Information
12.2 Man-Down and No-Movement Alarm
Man-down alarm: If the handset is tilted 45 degrees
seconds), the Man-down alarm will be triggered.
5.The accuracy is -/+10 degrees.
1424-EN/LZT 103 089 B 2014-04-13
can be defined to send an alarm by a long press and by multiple press.
12.1.2 Personal
until a dialog window "Test Alarm" (default) is
12.4 Acoustic Location Signal
on page 40)
on page 40.
twice or more, the dialog window "Personal Alarm" (default) is
12.4 Acoustic Location Signal
on page 40)
on page 40.
12.1.1 Test Alarm), and multiple press is
Alarm).
on page 40) is activated after the
on page 40) is activated after the
5
or more for a preset time (default 7
12.5 Automatic
12.3 Alarm with
12.5 Automatic
12.3 Alarm with
39