User Manual
Cordless Phones for MX-ONE™
2
Wait for the called party to reply. The message is replaced by the ongoing call details.
The user may now:
•
Continue with the call without referring back to the received message.
•
Redisplay the message and continue the call to further review and discuss the message. See
Redisplay the Message and Continue with the Call on page 65.
•
Redisplay the message and terminate the call. See Redisplay the Message and Terminate the
Call on page 65.
15.1.6
Calling a Different Party
To call another party to read and review a received text message, perform the following steps:
1
Open the message as described in
key.
2
From the pop-up menu, navigate to the "Call" menu item and press the "Select" soft key.
The pre-dial screen is displayed. Enter the number of the party to be called or select a
number from the handset call list or local or central phone books.
3
Press the "Call" soft key and wait for the called party to reply. The message is replaced
by the ongoing call detail. The user may now:
•
Continue with the call without referring back to the received message.
•
Redisplay the message and continue the call to further review and discuss the message. See
Redisplay the Message and Continue with the Call on page 70.
•
Redisplay the message and terminate the call. See Redisplay the Message and Terminate the
Call on page 71.
Redisplay the Message and continue with the call
1
To redisplay the message while the call is ongoing, select the "More" soft key.
2
From the pop-up menu, select "Messaging".
3
From the Messaging menu, select "Inbox". The received message summary is displayed.
4
Press the "View" soft key to display the message in full. If required, use the four-way
navigation key to scroll up and down a long text message to reveal the content while
reviewing and discussing the message with the called party.
Redisplay the Message and Continue with the Call
1
Press
the redisplayed text message
15.2 Message Templates
Predefined messages contained in message templates can be used in a number of different
situations to quickly construct a message rather than having to construct the message
completely from scratch.
Up to five predefined messages can be configured for the handset in the PDM/Device Manager.
This lets the user select and send a message appropriate to the current situation, such as "I am in
a meeting" or "I am in the operating theatre".
How to use the PDM/Device Manager to create store predefined messages the handset is
described in the Message Templates section of the handset configuration manual.
1424-EN/LZT 103 089 B 2014-04-13
13.5 Messaging
The call is terminated and the ongoing call summary details are replaced by
on page 50 and press the "More" soft
71