Alarm - Aastra DT412 User Manual

Alarm

86
Alarm
Note: The Alarm features are only available for the Cordless
DT422 and DT432 phone.
When you work alone and at risk, your personal safety is important.
For situations like this, the DT422 and DT432 Cordless phones are
equipped with a red Alarm key on top. When you are in trouble, just
press the Alarm key to summon help by sending a preset message
to the alarm central, which distributes it (requires an external
alarmserver).
Note: The Alarm features may be restricted or not
available. Ask the system administrator for the availability
and for more information.
Alarm with data
Additional data for example a location code, can be sent along with
an alarm. The data must manually be programmed by you. To use
the function, one Soft/Hot key must be defined as a short cut to the
menu
Edit alarm data
page 95. The stored data is added to all types of alarm at
transmission.
Automatic call after an alarm
The Cordless can be programmed to call a predefined telephone
number directly after an alarm. One Hot key must be programmed
with the specific telephone number, see section
keys" on page 95. It can be any external or internal telephone
number but also a pre-defined group of phones. The Cordless will
automatically call the telephone number after all types of alarm.
The automatic call can be programmed with speech monitoring,
i.e. the microphone on the Cordless that sends the alarm is
discreetly activated and will give the answering party opportunity to
listen and to take an appropriate decision on how to act.
BusinessPhone – Cordless DT412/DT422/DT432
, see section "Hot keys and Soft keys" on
"Hot keys and Soft