Alarm Operation; Push-Button Alarm; Test Alarm; Personal Alarm - Aastra DT4X3 User Manual

Cordless phones for businessphone
Hide thumbs Also See for DT4X3:
Table of Contents

Advertisement

User Manual
Cordless Phones for BusinessPhone™
7

Alarm Operation

The parameters described in this chapter are set in the WinPDM/CPDM3. See the
handset's Configuration Manual.
Note: The alarm functionality is applicable for DT423/DT433 only.
7.1

Push-Button Alarm

The push-button
multiple press. By default, long press is defined for test alarm (see
and multiple press is defined for personal alarm (see
7.1.1

Test Alarm

Press and hold the push-button
displayed. Depending on set parameters;
a beep is heard
the orange LED flashes twice
the vibrator stirs
the handset receives a notification that the alarm has been received by the system.
This is a system dependent feature.
if configured, the ALS (see
after the alarm has been sent, or a call is established to a pre-defined number (see
7.4 Automatic Call after Alarm
7.1.2

Personal Alarm

Press the push-button
(default) is displayed. Depending on set parameters;
a beep is heard
the orange LED flashes twice
the vibrator stirs
the handset receives a notification that the alarm has been received by the system.
This is a system dependent feature.
if configured, the ALS (see
after the alarm has been sent, or a call is established to a pre-defined number (see
7.4 Automatic Call after Alarm
7.2

Man-Down and No-Movement Alarm

Man-down alarm: If the handset is tilted 45 degrees
7 seconds), the Man-down alarm will be triggered.
No-movement alarm: If no movement is detected during a preset time (default 30
seconds), the No-movement alarm will be triggered.
When an alarm is triggered, the following occurs;
A Man-down warning. Cancel? or No- movement warning. Cancel? dialog window
is shown in the display, and a warning tone is also signaling during a period (default
7 seconds) before the alarm is sent.
6.The accuracy is -/+10 degrees.
AMT/PUD/TR/0119/1/2/EN 2012-08-13
can be defined to send an alarm by a long press and by
until a dialog window "Test Alarm" (default) is
7.3 Acoustic Location Signal
on page 39)
twice or more, the dialog window "Personal Alarm"
7.3 Acoustic Location Signal
on page 39).
7.1.1 Test
7.1.2 Personal
Alarm).
on page 39) is activated
on page 39) is activated
6
or more for a preset time (default
Alarm),
38

Advertisement

Table of Contents
loading

Table of Contents