Winding The Bobbin Thread, Regulating The Winder Tension - Pfaff 1245 Instruction Manual

Setting up
9

Winding the bobbin thread, regulating the winder tension

.02
Fig. 9 -02
● Place an empty bobbin 1 on winder spindle 1.
● Thread up as shown in Fig. 9-02 and wind the thread a few ttimes clockwise around
● The tension of the thread wound onto bobbin 1 is set on knurled screw 4.
● The bobbin winder will stop when suffi cient thread is wound onto bobbin 1.
● Loosen nut 5.
● Turn thread guide 6 as required.
● Tighten nut 5 again.
26
4
1
3
bobbin 1. Engage the bobbin winder by pressing spindle 2 and lever 3 simultaneously
The bobbin is wound during sewing.
If the thread is wound on unevenly:
Keystone Sewing Machine Company, Inc.
5
2
6