Winding The Bobbin Thread, Regulating The Winder Tension - Pfaff 422 Instruction Manual

Setting up
9

Winding the bobbin thread, regulating the winder tension

.02
If the thread is wound on unevenly:
9 - 2
4
-
1
3
Fig. 9 - 02
Place an empty bobbin 1 on winder spindle 2.
Thread up as shown in Fig. 9 - 02 and wind the thread a few times clockwise around
bobbin 1.
Engage the bobbin winder by pressing spindle 2 and lever 3 simultaneously.
The bobbin is wound during sewing.
The tension of the thread wound onto bobbin 1 is set on milled screw 4.
The bobbin winder will stop when sufficient thread is wound onto bobbin 1.
Loosen nut 5.
Turn thread guide 6 as required.
Tighten nut 5 again.
+
5
2
6