Epson DFX-8500 Service Manual page 119

6. Remove 6 screws (4 CBB, M3×12 and 2 CBS (O), M3×8) securing the main board, then remove the
main board.
: Screw (CBS (O), M3×8) × 2
: Screw (CBB, M3×12) × 4
When you install the main board, perform the following adjustments, described in Chapter 4:


Platen gap adjustment.


Bidirectional printing adjustment.
CN8(8-pin)
Figure 3-33. C204 Main Board Removal (3)
Hooks for C204 Main Board Installation
Figure 3-34. C204 Main Board Removal (4)
REQUIRED ADJUSTMENTS
DISASSEMBLY AND ASSEMBLY
Cable
C204 Main Board
C204 Main Board Unit
3-25