INITIALIZATIONS
Hardware Initialization
Initialization occurs when the printer is turned on or when the printer receives an /INIT signal (negative
pulse) or cold-reset command (remote RS command). Initialization does the following:
initializes the printer mechanism
clears all data buffers
cancels downloaded character translation
places the printer in a stand-by state
performs a software initialization (see below)
Software Initialization
The control codes ESC @ (for ESC/P) or ESC [K (for IBM/Lexmark 2381 Plus) will also initialize the printer.
Software initialization sets all printer settings to their default values.
Panel Initialization
You can initialize the printer from the control panel by pressing the Reset button for 3 seconds. This
initialization:
clears all data in the buffer
performs a software initialization
PRODUCT DESCRIPTION
1-39