DFX-8500
3.2.6.11 Paper Jam Sensor Removal
Step 1: Remove the platen along with the lower paper guide composed of 3 parts. (Refer to Section
3.2.6.10.)
Step 2: Remove the CPN(SP)(M4x8) screw securing the left part of the lower paper guide to the platen.
Step 3: Remove the part from the platen.
Figure 3-64. Lower Paper Guide Left Part Removal
Step 4: Unhook the paper jam sensor (magnetic transistor) cover to remove it.
Step 5: Remove the paper jam sensor.
Figure 3-65. Paper Jam Sensor Removal
ASSEMBLING POINT
When you attach the paper jam sensor, make sure it is oriented correctly (front to back).
3-44
Rev. B