DFX-8500
3.2.4.5 C204 Main Board Removal
1. Remove the left and right covers. (See Section 3.2.3.2.)
2. Remove the bottom panel. (See Section 3.2.4.1.)
3. Remove the C204 SUB board. (See Section 3.2.4.3.)
4. Remove the C204 DRV-B and C204 DRV boards. (See Section 3.2.4.4.)
5. Disconnect CN6, CN7, CN8, and CN10 on the main board. (See Figures 3-31 through 3-33.)
3-24
Harness
to CN7(6-pin)
to CN6(7-pin)
CN2
C204 Main Board
Figure 3-31. C204 Main Board Removal (1)
to CN10
(8-pin)
CN10
(8-pin)
Figure 3-32. C204 Main Board Removal (2)
CN3
Cable
to CN4
CN4
C204 Main Board