Epson DFX-8500 Service Manual page 127

Figure 3-47. Ribbon Feed Change Lever Unit Removal (2)
Connector Junction Board
When you install the ribbon feed change lever unit, make sure you correctly join the tip of the tractor
select lever and the tractor select gear holder. (See Figure 2-12.)
Screw (CBB, M4×10)
CN1
To Ribbon Feed Motor
Figure 3-48. Removing Connectors
REMINDER
DISASSEMBLY AND ASSEMBLY
Front Panel
C204 PNL Board
CN2
To Tractor Select Sensor
To Ribbon Jam Sensor
3-33