Stream(N). Type "rtsp://192.168.0.161:8554/stream" (where 192.168.0.161 is the IP
address of the WiMi6200T) on the network URL field, and play. Please use the VLC
version 2.0 or later.
5)
VLC will now decode the incoming RTSP stream from the WiMi6200T.
6)
The delay of video on the VLC player can be controlled via network caching time.
Below capture shows this. ① Click the "Show more options" ② Reduce the network-
caching time to 100ms. This value should be changed to proper value according to the
network delay between the WiMi6200T and the PC on which the VLC player is running.
③ Click the Play button.
7)
If there is a WiMi6200R on the same network, the 6200R can decode video even
though the VLC player is decoding the live video on the PC.
Note) In some PC, the 1920x1080p60 resolution would not be able to be decoded properly.
In this case, you can see clean video if you change the input video resolution to 1280x720p60
or change the frame rate from 60Hz to 30Hz (1920x1080p30) via encoder setting (Section
3.4.1.4)
Distributed by Pera Systems, Inc.
Page 24
WiMi6200 User's Manual
v1.2
Need help?
Do you have a question about the WIMI6200 and is the answer not in the manual?