Connecting To The Mcu - Polycom RMX 2000 Installation & Configuration Manual

Product Registration and Activation Key Retrieval
Before starting the initial configuration process, register the RMX at the
Polycom Resource Center website and download the product activation
key file to the computer you will use for the configuration:
1
Using a Web browser, connect to
2
Login with your Email Address and Password or register as a new
user.
3
Select the Product Registration link.
4
Follow the on-screen instructions for Product Registration and
Product Activation. (The RMX's serial number is on a sticker on the
back of the unit, if needed.)
5
Write down the Product Activation Key number or copy it for later
use.

Connecting to the MCU

1
Start the RMX Web Client application on the workstation by
entering in the browser's address line the IP Address of the control
unit as defined in the USB key in the format:
http://<Control Unit IP Address>
2
Once the RMX Web Client Welcome screen is displayed, you can
remove the USB key from the RMX.
3
In the Welcome screen, enter the default Username (POLYCOM)
and Password (POLYCOM) and click Login.
The RMX Web Client opens. An MCU State indicator displays a
progress indicator showing the time remaining until the system
start-up is complete.
The Product Activation dialog box is displayed with the serial
number filled in.
4
In the Activation Key field, enter or paste the Product Activation Key
retrieved earlier and click OK.
http://portal.polycom.com
and pressing Enter.
.
5