Polycom RMX 2000 Installation & Configuration Manual page 3

When the RMX is installed for the first time, you must change the
default IP addresses to your local network settings. This can be done by
modifying the default settings in the USB key shipped with the unit
using the LAN Configuration Utility and uploading them to the RMX.
1
Take the USB Key from the Installation Accessories kit and insert it
into a PC.
The Polycom Documentation window opens.
In Windows XP:
a
The Polycom Documentation option is automatically selected.
Click OK.
In Windows 7:
a
Select Open Folder to view files using Windows Explorer.
b
Double-click the index.hta file.
The Language Menu opens.
2
Select the documentation language.
3
In the License Agreement window, click the Accept Agreement
button.
4
In the Initial Setup Utility, click the RMX Lan Configuration Utility
hyperlink.
The LanConfigUtility dialog box opens.
5
Modify the required network parameters in the utility's dialog box
using the information supplied by your network administrator.
6
Click OK.
7
Remove the USB Key from the PC.
The USB key is required for first entry power-up of the RMX.
Installing the RMX
8
You can install it either in a rack or place it on a flat surface:
— Install the RMX on a rack using one of two methods:
• Install the brackets supplied by the rack manufacturer on
each side of the rack on which the RMX is placed.
3