Alvarion BreezeMAX Si 4000 CPE User Manual page 88

Chapter 7 - Setting Advanced Parameters
Authentication Method - Select one of the following WiMAX security

methods:
»
»
»
When Authentication is enabled, set the following parameters:
User Name - Enter the user name supplied by the service provider (Default:

wan mac address@WiMax.com, e.g. 0026824EE12C@WiMax.com).
Password - Enter the user password supplied by the service provider). Default:

quickynikynyoky
Password Confirmation - Re-enter the user password to confirm it.

BreezeMAX Si 4000 CPE
None - Authentication is disabled
EAP-TTLS-MSCHAPV2 (Default) - EAP-Tunneled Transport Layer Security,
supporting the Microsoft version of the Challenge-handshake
authentication protocol, version 2.
EAP TLS - EAP-Transport Layer Security (available only if enabled by the
operator)
72
Authentication
User Manual