Introduction - Alvarion BreezeMAX Si 4000 CPE User Manual

Chapter 3 - Commissioning
3.1

Introduction

After completing the installation process, as described in the preceding chapter,
several actions should be performed to ensure connectivity with a base station
(BS) and provisioning of services. After the subscriber unit is connected with a BS,
it can be fully managed via the wireless link:
1
The basic parameters must be configured to ensure that the unit operates
correctly and can communicate with a BS.
2
Proper operation should be verified, including data connectivity.
3
The unit must be positioned correctly to ensure optimal performance of the
wireless link.
The following methods are available for configuring the BreezeMAX Si 4000:
The web-based management interface - accessed using a PC/Notebook with a

web browser (see
on page
An automatic configuration tool provided on a CDROM for the subscribers (see

"Configuring the CPE Using the WiMAX Modem Application CD" on page
Upgrading the CPE using an auto-configuration file, or IPKG (in *.ipk format)

(see
The device may be delivered with the operator's default settings already configured
in the FLASH memory.
The following parameters must be configured in order for a link to be established.
Item
User Name (WiMAX)
WiMAX Password
Domain
Frequency
BreezeMAX Si 4000 CPE
"Configuring the CPE Using the Web Management Interface"
33).
"Operation Verification" on page
Table 3-1: Basic Parameters
Default Value
WAN mac address and WiMax.com
realm, e.g:
0026824EE12C@WiMax.com
quickynikynyoky
wimax.com 
(also Eng > WiMAX Config > Realm
Full Scan
40).
Comment
Should be supplied by system
administrator. Configured in the
Advanced> Authentication window
Should be supplied by system
administrator.
31
Introduction
36).
User Manual