Alvarion BreezeMAX Si 4000 CPE User Manual page 108

Chapter 8 - Displaying Status Details
Parameter
Scan Type
RSSI
Temperature
Overheat
TxPwr
Min Tx Power
Min RSSI
Min CINR
Center Frequency
WiMAX TX
Data Rate
Packets
BE bytes
UGS bytes
BreezeMAX Si 4000 CPE
Table 8-2: WiMAX System Parameters (Continued)
Description
The method by which the network is
scanned
Currently received signal strength
indication
Unit's temperature
Indication of temperature higher than
40°
Current uplink transmit power
Minimum uplink transmit power
Minimum received signal strength
indication
Minimum Carrier to
Interference-plus-Noise Ratio
The middle frequency of the bandwidth
of a channel. The unit is synchronised
on this frequency.
The level of available data throughput
that can actually be provided to an
end-user.
Number of carried blocks of data
Total number of bytes sent on Best
Effort connection
Total number of bytes sent on
Unsolicited Grant Service connection
Possible values

Fullband - The system will try to scan
the whole frequency band.

CAPL - Channel Allocation Priority
Level. The system allocates priority
to channels for scanning order.

Neighbor - The system will try to
scan the neighbor BS to the previous
BS defined in "Last good BS". The
neighbor BS details will appear in the
table of this section.

History - The system will try to scan
with the previous good BS to speed
up the scan duration. A "good BS" is
defined as one with which the unit
can get an IP address.
-35 to -100 dBm
92
WiMAX Status
User Manual