Chapter 4 - Configuring Setup Parameters
4.3
Setting Password
The Password page enables you to change the default password for remote and
local access to the Graphical User Interface (GUI).
NOTE
It is strongly recommended that you configure your own password. If a password is not configured,
the management interface is not protected and your network security may be compromised since
the default password is not secure.
Keep a record of the password in a safe place, in case you will need to restore it.
To change the login password:
1
Enter a new login password (up to 19 characters)
2
Enter the new password again for verification.
3
Click Apply.
BreezeMAX Si 4000 CPE
Figure 4-2: Setup - Password
47
Setting Password
User Manual