Alvarion BreezeMAX Si 4000 CPE User Manual page 61

Chapter 4 - Configuring Setup Parameters
Parameter
Operation Mode
Internal Management/VoIP Connection Mode
Management
Connection Mode
VoIP Connection
Mode
BreezeMAX Si 4000 CPE
Table 4-1: Basic Parameters (Continued)
Description
Specifies the mode for forwarding data
packets from the service provider's
WiMAX network to the local network.
Sets the forwarding mode for sending
management packets to the WiMAX
network:

Bridge mode - forwards packets
based on Layer 2 MAC addresses.
Bridge mode means that
management connection has a
different IP than data connection.
This IP is used for communication
with the management server, for
web access from WAN, ping, etc.

Router mode - forwards packets
based on Layer 3 IP addresses.
Sets the forwarding mode for sending
VoIP packets to the WiMAX network:

Bridge mode forwards packets
based on Layer 2 MAC addresses.
Bridge mode means that voice
connection has a different IP than
data or management connections.
This IP is used only for SIP/RTCP
and RTP messages sent and
received by the device's POTS
(plain old telephone service) lines.

Router mode forwards packets
based on Layer 3 IP addresses.

None - No forwarding
Default
Router
Router
Router
45
Setting Basic Parameters
Possible Values

Router (the only option,
unless differently
configured by Alvarion)

Bridge IPCS

Bridge ETHCS

Bridge

Router

Bridge

Router

None
User Manual