Rear Panel - Alvarion BreezeMAX Si 4000 CPE User Manual

Chapter 2 - CPE Installation
Table 2-3: BreezeMAX Si Premium Model LEDs Status Indications
LED
Power (1)
WiMAX (2)
LED 3 - WiMAX Signal
LED 4 - WiMAX Signal
LED 5 - WiMAX Signal
Wi-Fi (6)
VoIP (7,8)
2.3.2

Rear Panel

The BreezeMAX Si 4000 includes one LAN port for 10/100 Mbps Ethernet
connection, one RJ-11 Voice over IP (VoIP) phone port, and an AC power jack.
The BreezeMAX Si 4000 Premium model includes two LAN ports for 10/100 Mbps
Ethernet connection, two RJ-11 Voice over IP (VoIP) phone ports, and an AC
power jack.
The following table summarizes the BreezeMAX Si 4000 rear panel elements:
BreezeMAX Si 4000 CPE
Color Status Description
Blue Off AC input not active or power failure
On Power on

Blinking


Blue Off The modem is not connected to base station
On The modem is connected to base station
Blue On The greater the number of WiMAX signal strength
lights are on, the better the performance.
Blue On
Blue On
Blue On Wi-Fi enabled
Off Wi-Fi disabled

Blue Off



On VoIP (voice) is configured and available after
successful registration to the SIP server
Blinking Voicemail waiting
24
BreezeMAX Si 4000 Hardware Description
The modem is booting (blinking ~25 seconds).
The modem is not functional or is being remotely
managed (e.g., software is being upgraded, or
application is loaded)
Stops blinking when scanning begins. Radio is
operational.
VoIP (voice) is not configured
The modem is not connected to the network
SIP registration time expired
SIP registration in process
User Manual