Configuring The Cpe Using The Wimax Modem Application Cd - Alvarion BreezeMAX Si 4000 CPE User Manual

Chapter 3 - Commissioning
3.3 Configuring the CPE Using the WiMAX
Modem Application CD
This section explains how to use the automatic configuration tool, delivered on a
CDROM with the unit, to automatically configure a CPE. This procedure is usually
performed by the subscriber.
To configure the unit using the Auto-Configuration tool:
1
From the CDROM supplied with the unit, run the CPE Auto Configuration
Tool: CPEAutoConfigTool.exe; The Installation Setup Wizard window is
displayed.
2
Click Next to continue; The Choose Your ISP window is displayed.
BreezeMAX Si 4000 CPE

Configuring the CPE Using the WiMAX Modem Application CD

Figure 3-3: Installation Setup Wizard Window
36 User Manual