Reset Button; Wimax Antennas; Breezemax Si 4000Cables - Alvarion BreezeMAX Si 4000 CPE User Manual

Chapter 2 - CPE Installation
2.3.3

Reset Button

The recessed button is used to reset the BreezeMAX Si 4000 or to restore the unit
to factory default configuration.
Do not perform reset to factory default unless specifically instructed by

customer support.
To perform a hardware reset, press the button for approximately 1 second.

To restore the device to the factory default settings, press and hold the button

for 5 seconds or more; any configuration changes you made are removed and
the factory default configuration is restored to the unit.
Some user-configured parameters will be lost and must be reconfigured.

2.3.4

WiMAX Antennas

Two WiMAX antennas are included with the BreezeMAX Si 4000 for WiMAX
communications.The BreezeMAX Si 4000 antennas are embedded in the unit. In
the Premium model, the antennas are external and fold out.
2.3.5

BreezeMAX Si 4000Cables

NOTE
The length of the Ethernet cable connecting the BreezeMAX Si 4000 to the data equipment, must
not exceed 100 meters.
Use only Category 5E Ethernet cables from either Alvarion or any of the approved
manufacturers, listed in
suitability of other cables.
Manufacturer
Superior Cables Ltd. 
www.superior-cables.com
HES Cabling Systems
www.hescs.com
BreezeMAX Si 4000 CPE
Table 2-5. Consult with Alvarion's specialists on the
Table 2-5: Approved Category 5E Ethernet Cables
27
BreezeMAX Si 4000 Hardware Description
Part Number
612098
H5E-00481
User Manual