Alvarion BreezeMAX Si 4000 CPE User Manual page 62

Chapter 4 - Configuring Setup Parameters
Parameter
Connection Mode
Connection Mode
WAN MTU
WAN MTU
NOTE
Static IP is not supported by 4Motion equipment.
BreezeMAX Si 4000 CPE
Table 4-1: Basic Parameters (Continued)
Description
Sets the connection type for the unit:

DHCP - The system will assign IP
addresses to the unit on the local
area network.

Static - The IP address is predefined
and fixed. When you select this
option, new menu items are
displayed for configuration:
»
WAN IP Address
»
WAN Subnet Mask
»
WAN Gateway Address
»
DNS1- Domain Name System
»
DNS2
Sets the WAN maximum transmission
unit (MTU) size in bytes

Auto (1400) - transmission unit size
is 1400 bytes

Manual - enter the value for
transmission unit size (Range:
576-1500)
Default
DHCP
Auto (1400)
46
Setting Basic Parameters
Possible Values

DHCP

Static

Auto (1400)

Manual
User Manual